IAQ Monitoring
for Residential and Commercial Buildings

Atmocube IAQ sensors measure key indoor air pollutants

CH2O

Formaldehyde, CH2O is a colorless volatile organic compound with a strong odor. There are two main sources of it: off-gassing and combustion. Formaldehyde is presented outdoors, but its concentrations indoors are higher due to its emission prevalence in building materials and household products.

PM1 , PM2.5, PM10

TVOC

Temperature & Humidity

Generally, people feel comfortable at temperatures between 21°C to 27°C (69°F to 80°F).

Generally, people feel comfortable at a relative humidity between 40% to 60%.

Carbon Dioxide

Light intensity

Light intensity requirements depend on the space's specific purposes. The light levels for a conference room or a library should be 300-500 lux (30-50 fc), while professional laboratories require 750-1200 lux (75-120 fc). Workspaces and spaces for the elderly people need more than 500 lux (46 fc). In the evening hours, light intensity should be as low as 5 lux (0,46 fc) to eliminate sleep disruption.

Atmospheric Pressure

Noise

Noise levels above 70 dB over a prolonged time period may start to damage your hearing.

PM1, PM2.5, PM10

PM1 are ultrafine particles with a diameter smaller than 1 micrometer: dust, combustion particles, bacteria. PM2.5 can be made of different chemicals like black carbon, ammonia, sulfur dioxide, etc. PM10 or coarse dust particles refer to particles with a diameter less than or equal to 10 microns in size. They are about 30 times smaller than the width of human hair and are small enough to get inhaled into our lungs.

Formaldehyde

Relative Humidity & Temperature

TVOC

Total Volatile Organic Compounds metric is the total concentration of volatile organic compounds in the air. VOCs are carbon-containing chemical gases emitted from solids and liquids. VOCs are not only hazardous but also play a significant role in the formation of ozone and fine particulates (PM) in the atmosphere.

Light Intensity

CO2

Carbon dioxide is an odorless non-toxic gas. People exhale CO2 when they breathe. When there are several people in a poorly ventilated room, CO2 concentration increases and affects occupants’ wellbeing. Safe standards for indoors: 400-1000 ppm.

Atmospheric pressure

When barometric pressure drops, your blood pressure decreases. For some, this can mean dizziness or even blurred vision. Also some people experience high-altitude headaches due to changes in barometric pressure, such as during plane travel.

Noise Levels

Sensor upgrades: CO (Carbon monoxide), O3 (Ozone), Occupancy

Atmocube has been recognized for accuracy and design excellence

Dashboard and apps

See live and historical IAQ data on your dashboard or mobile app. Manage devices, set alerts, download environmental reports, and more. Custom reports available for WELL certification.

REST API and MQTT

Integrate the data with third-party platforms through REST API.
Ensure full data ownership and security by sending the data to your remote cloud through MQTT protocol.

IAQ data display

To increase awareness about IAQ control, show the data to your tenants on an ATMO® custom e-ink display or full screen through Bluetooth. No Wi-Fi needed.

*The e-ink display is a standalone product and should be ordered separately.

Dashboard and apps

See live and historical IAQ data on your dashboard or mobile app. Manage devices, set alerts, download environmental reports, and more. Custom reports available for WELL certification.

REST API and MQTT

Integrate the data with third-party platforms through REST API.
Ensure full data ownership and security by sending the data to your remote cloud through MQTT protocol.

IAQ data display

To increase awareness about IAQ control, show the data to your tenants on an ATMO® custom e-ink display or full screen through Bluetooth. No Wi-Fi needed.

*The e-ink display is a standalone product and should be ordered separately.

Continuous air quality monitoring for green building certifications

Certify your building with a RESET Grade B monitor. Compliant with WELL Standard requirements.

Learn more
Technical specification
from sensor manufacturer:
CO2**

± 75 ppm @ 400 – 1000 ppm
± 40 ppm + 5% of reading @ 1001 ppm – 2000 ppm

PM1, PM2.5

± [5 μg/m³ + 5 % m.v.]
at 0 to 100 μg/m³
± 10% m.v. at 100 to 1000 μg/m³

PM10

± 25 μg/m³ at 0 to 100 μg/m³
± 25% m.v. at 100 to 1000 μg/m³

TVOC*
Formaldehyde

± 20 ppb or ± 20% m.v.

Atmospheric pressure

± 1 hPa

Temperature & Relative humidity

± 0.9 °F (± 0.5 °С)
± 2 @ 20-80%

Noise

from 37 dB

Light intensity
PROTOCOLS:
  • MQTT
  • Modbus RTU
  • Modbus TCP
  • BACnet (via a gateway)
INTERFACES:
  • Wi-Fi (802.11 b/g/n @ 2.4GHz)
  • Bluetooth 4.1
  • Ethernet
  • USB-A
  • RS-485
Power:
  • USB-C, 50/60Hz, 5V @ 2A
  • Direct wiring, 24V AC/DC
  • PoE
On-device storage:
  • One week (measurements in one-minute-intervals)
Cloud data storage:
  • Optional SaaS cloud storage, dashboard,  alerts, reports, data exports, data access control, REST API
SECURITY:
  • Wi-Fi Protected Access WPA / WPA2 / WPA2-Enterprise / WPA3
  • Cloud access: customizable admin and user role configurations
  • SSL end to end encryption
Indication:
  • RGB LED panel to indicate environment and air quality

Upgrade options

Sensors:
  • CO (Carbon monoxide)
  • O3
Design:
  • Custom front tiles design
  • Co-branding
PROTOCOLS:
  • BACnet MS/TP
  • BACnet IP

IAQ monitoring system for your project

IAQ monitoring system for your project

Air Purification
Combine your air purification system with monitoring for automated climate control.
Healthy Workplaces
Create a healthier and more productive office environment with an air quality sensor network.
New Buildings
Install IAQ monitors during the construction phase for a seamless building management system.
HVAC Integration
Integrate Atmocube into your BMS/BAS. Test air quality before and after equipment installation.
Book a free demo
Purchase a sample today

*Not available for personal use

Order now
Frequently Asked Questions
How can I buy a sample device?
Fill out the form here, and you will receive a link to purchase up to 3 sample devices for a special price.
Do Atmocube sensors require manual recalibration?
Atmocube sensors have automatic self-calibration, cleaning, and data normalization algorithms, which ensure long-term stability without the need for any manual action from users. Read more about sensor calibration. However, if your project requires annual sensor calibration or replacement, we offer annual sensor maintenance subscription.
Where can I learn more about the indicators on Atmocube?
You will learn more about the sensors and indicator colors in the knowledge base.
Where can I learn about Atmocube’s sensor accuracy and certifications?
Will Atmocube help us comply with WELL, RESET, Fitwel, LEED, and other green building standards?
Yes. You can earn additional points for real-time air quality monitoring for some of the standards. Read more about Atmocube’s sensor compliance with specific green building standards.
How can I connect and power Atmocube?
Atmocube supports WiFi, RS-485 (Modbus RTU) and Ethernet for data transferring. The powering options are USB type-c, PoE, 24V AC/DC.
Can I configure a local MQTT environment for Atmocube?
Yes. Follow these guidelines to set up a local MQTT environment.
Can we access data from multiple Atmocubes simultaneously?
Yes. The Atmocube Cloud Dashboard allows you to connect and access data from multiple devices.
How can my space visitors learn about indoor air quality?
Atmocube helps you be transparent with your space visitors about the air quality in two ways. Firstly, you can showcase the data on our e-ink screen or any other monitor/mobile device using the display mode. Secondly, you can encourage frequent visitors to download the user app.
How many Atmocubes do we need for our building?
For accurate readings, we recommend installing one monitor per 3500 square feet (325 square meters) of open space.
Who can I ask questions which are not covered here?
Book a call with our team to ask further questions
Support Center & Knowledge Base